Dissertation Paper Stock

What is Thesis On Demand?
Thesis On Demand is an online service dedicated to printing and binding theses and dissertations.

What is your refund/cancellation policy?
Please see this page for complete instructions: Refund Policy

Shipping Restrictions
At this time we are unable to ship to PO Boxes using UPS – please do not use PO Boxes when adding your shipping information.

How can I make sure my PDF will work with your site?
If making a PDF using MS Word:
Please use MS Word 2007+:
Choose the Save AsPDF or XPS option or PDF option when saving NOT Adobe PDF:

If not using Word to create your document or alternatively you can use a third-party PDF creator. We recommend CutePDF: http://www.cutepdf.com/Products/CutePDF/writer.asp which installs a printer on your system:

Simply choose to PRINT your document and choose Cute PDF instead of your normal printer
Remember to change your settings by clicking on the Printer Properties and choosing advanced and then the below option:

Can changes be made to my order after I have submitted order?
To avoid changes and additional charges, we recommend you check to make sure the file and order information is correct, and that your thesis or dissertation meet the requirements of the school prior to submitting the order. Any change to your order after it has been submitted will result in a minimum charge of $25.00. If the order has been put into production the additional cost will be the minimum charge of $25.00 plus the cost of reprinting and/or rebinding your order with the submitted changes. Your thesis usually prints shortly after receipt of the completed order. Because of our automated process and time to halt or change production any changes to an order after the order has been submitted, including but not limited to submitting a new corrected file, changing from double to single sided printing, single to double sided printing, paper type or other changes or instructions will result in the additional charges to complete the revised order.

What things should I be aware of when preparing my PDF?
There are a couple of things to be aware of when creating your PDF for upload to our system – they are:

  • Make sure your fonts are embedded – this is an option available in most PDF-producing programs. To check if your fonts are embedded:
    1. Open Adobe Reader or Adobe Acrobat
    2. Click on “Document Properties”
    3. Click on “Fonts Tab”
    4. Each font listed should have “(Embedded)” or “(Embedded Subset)” next to the font
    5. If font does not have one of these next to it, font is NOT embedded
  • Make sure images that are embedded in your document are the highest quality you can get. We suggest a minimum 300 dpi for images or graphics. Although in most cases lower dpi images print quality is acceptable in thesis, note that images under 300 dpi may print with a lower resolution resulting in poor print quality.
  • Make sure you have permission to use any images contained within your thesis or dissertation

Can I have my title and degree added to the spine?
Yes, but you have to specify this when placing your order. If your title is too long to fit the spine it will be truncated. There is no extra charge to choose this option.

How is my title printed on the spine and front page?
Unless customer specifically requests for the front cover of their Thesis to be stamped with Mixed Case text, by means of a written note in the special instructions field, we will stamp all cover and spine information in capital letters.

What are my paper and size options?
Standard thesis are printed in portrait orientation(8.5″ width x 11″ height) and our standard product is produced using archival 8.5″ x 11″ White Vellum 60# paper that meets or exceeds all specifications in the ANSI/NISO standard for paper permanence (see ANSI/NISO Z39.48 -1992(R2002) Permanence of Paper for Publications and Documents in Libraries and Archives). However, you can choose to have your thesis printed on Vanilla Vellum 60# archival paper.

If you choose to have your order printed at an A4 size, note it will only be printed on the White Vellum 60# paper. Other selections for paper stock are not available with this option. Choose the A4 paper option when ordering ONLY if you want it printed and bound A4 size. If you submit your file A4 size and do not specify the A4 size paper from the choice of paper (additional cost), your thesis will be bound 8.5×11. If you want other options for your thesis not shown on the order form (ie..landscape, larger sizes), please contact customer service for pricing.

Can I have my thesis printed on cotton paper?
Yes, you must specify this option when placing your order. Cotton paper provides a nice texture for the paper, but it is not as permanent than our standard archival paper. There is a small charge for a cotton paper option.

Can I have my thesis printed double-sided?
Yes, double-sided printing is available. Choose this option when ordering. You must make sure that your file is formatted for double-sided printing. This means you must insert blank pages as needed to print as you want it. We cannot modify your file if it is not formatted correctly. If printing double sided and you are sending in signature pages for us to add to your thesis, you MUST make sure to format your thesis correctly so that we can insert the signature pages or replace the unsigned copy if needed. This may mean you insert blank pages when creating your file. We are not responsible for thesis that have been printed that the customer has not formatted properly. Printing and binding a corrected thesis will be charged as a new thesis order.

Can I use my original signed signature pages?
Yes, you must print a completed order page and send that, along with your signature pages, to the address shown on the page. This may delay the delivery time because we cannot print or bind your volumes until the signature pages are received. There is a small charge for signature pages. Also make sure that if you are having your thesis printed double sided, to make sure your thesis is properly formatted (as described under double sided printing) to allow the signature pages to be inserted, and if needed, a single sided page to be removed. There will be additional charges if a file is not formatted properly to add signature pages, and we have to format and/or reprint any part of the file, or if thesis needs to be returned to us for repair or reprint because the file was not formatted correctly. If there is no blank signature page in your file to replace and if you have not given instructions on where your signature pages should be placed, we will add the signature pages in front of all other pages.

What are my cover color options?
Our covers are made using Group F buckram, which is available in 15 different colors and are available for viewing when placing your order. Leather is also available for the cover in colors shown in the drop down box. If ordering Buckram, click on the color you want. If ordering leather, choose the color from the drop down box. Leather requires additional production time and is not available on a RUSH order.

My thesis has a couple of foldouts in it. Do you have the capabilities to work with these?
Yes. Thesis On Demand is a branch of our Preservation Photocopy department and we do this kind of work frequently. You simply note the pages that need to be treated as foldouts when placing your order. There is a small charge for foldouts.

What if I have pocket material or I want to place a CD in my thesis-can you do this too?
Yes, we can provide pockets for extra materials and CDs. This is an option you must specify during your order. There is a small charge for pocket material.

We make a paper pocket and place it on the inside of the back cover for extra materials. For CDs or DVDs we mount a plastic case on the inside of the back cover. If both a paper pocket and a CD case are needed we will place the pocket on the inside of the back cover and the CD case on the inside of the front cover.

When should I expect my bound theses or dissertations?
You should expect your bound product to ship in approximately two weeks(not including holidays) from the order date, or from the date on which we receive your signature pages if you have selected that option. Thesis ordered bound in leather will ship in approximately six weeks from the order date.

Is there a rush service on this product?
Yes, rush service is available. If you select rush service your bound product should ship in approximately one week from the order date or from the date on which we receive your signature pages if you have selected that option. Rush service is not available if ordering leather.

I have only one color page. Can I print that out myself and send it to you?
No. Our automated production process, which allows us to offer reasonable prices, makes it impossible to handle individual pages within the textblock.

I want to send my thesis/dissertation to several different people. Will you ship to multiple addresses?
We are not able to send products from a single order to multiple addresses. If you do not want to ship them yourself, you can place separate orders for each address.

Can I have my order shipped to a foreign address?
No, we are not able to ship orders to PO addresses OR outside the United States.


Specifications for Thesis Preparation


What Happens to the Thesis?
Submission Date
What is Submitted?
Bachelor's Degree Theses
Graduate Degree Theses
Joint Theses
Submission of Doctoral Thesis Abstract to International Database
Changes after Submission of Thesis
Implementation: How to Copyright a Thesis
Use of Previously Published Material
Policy for Temporary Restrictions on the Distribution of Theses
Patent Claims
Government Restrictions
Privacy and Security
Prefatory Material
Selecting a Title
Thesis Title Page
Thesis Abstract Page
Biographical Note and Acknowledgment
Sample Title Pages
Notes and Bibliographical References
Typeface and Size
Margins and Spacing
Using Athena
Double-sided or Single-sided Printing
Oversized Pages
Use of Color
Non-paper Formats


Revised: October 2017; Valid: 2015-2016, 2016-2017, 2017-2018



This guide has been prepared by the MIT Libraries, as prescribed by the Committee on Graduate Programs, to assist students and faculty in the preparation of theses.  The Institute is committed to the preservation of each student's thesis because it is both a requirement for the MIT degree and a record of original research that contains information of lasting value.

The requirements in this guide apply to all theses and have been specified both to facilitate the care and dissemination of the thesis and to assure the preservation of the archival paper copy. Individual departments may dictate more stringent requirements.  Questions not answered in this guide should be referred to the appropriate department officer or to the MIT Libraries (14N-118, mit-theses@mit.edu, 617-253-5136).


The academic department is required to deliver the proper number of copies of the thesis to the MIT Libraries within one month after the last day of the term in which the thesis was submitted (Faculty Regulation 2.72).  One copy is kept as part of the permanent archival collection, and the other copy is reserved for future disposition.

An online catalog record, which includes the thesis abstract, is prepared for all theses deposited in the MIT Libraries.  This information appears in Barton, our online catalog, which is accessible to researchers at other institutions through the Internet, as well as in the OCLC database WorldCat, an online international bibliographic system available to libraries and individuals worldwide.  PhD and ScD theses are also listed (with abstract) in ProQuest Dissertations & Theses database (PQDT) and Dissertation Abstracts International (DAI).

For each thesis received by the Libraries, a digital version is created and made publicly available in DSpace@MIT (http://libraries.mit.edu/mit-theses).   Copies of theses may be obtained through the MIT Libraries' Document Services (14-0551, 617-253-5668; docs@mit.edu; http://libraries.mit.edu/docs/). Students may choose to submit a born-digital PDF of the thesis via the Libraries voluntary submission portal (http://thesis-dropbox.mit.edu/vireo/start). However, the electronic version is not considered to be the official copy.


Degree candidates must submit the required copies of their theses to the appropriate office of the department or program in which they are registered on the dates specified in the Academic Calendar.  The Academic Calendar may be found in the MIT Bulletin and at http://web.mit.edu/registrar/www/calendar.html.  September, February, and June are the only months in which degrees are awarded.  Additional copies of the thesis may be required by the department.


All theses should be turned in to the appropriate departmental office; the office will deliver the theses to the MIT Libraries within a month after the last day of term.  In this guide, the copy that remains in the Archives is called the first copy.  Additional copies required for the divisional libraries (see following section) are referred to as the second and (possibly) third copies.  The department may ask for copies in addition to those required for the Libraries.  The student may, of course, keep personal copies.

Bachelor's Degree Theses

Not all departments send bachelor's theses to the Archives.  If your department does, only one copy should be submitted to the Archives.  Please check the requirements of your department. Undergraduate students do not pay a library processing fee.

Graduate Degree Theses

  • Number of copies: Normally, two copies are required for the Libraries – one for the Archives and a second for the appropriate divisional library.  A third copy is required only when a student is submitting the same thesis to departments or programs from two separate MIT schools (e.g., Management and Engineering).  If the departments are in the same school (e.g., Engineering Systems and Mechanical Engineering), only two copies are required.
  • Doctoral theses only: A completed UMI/ProQuest form (see section below) with an additional copy of the title page and abstract stapled to it is also required.

Joint Theses

Most MIT theses are written by a single author.  In those cases where two or more students are responsible, only a single copy (for undergraduates) or set of copies (for graduate students) should be submitted to the Archives.  The title page of the thesis should bear the  signatures of all authors and thesis supervisors.  Permission to undertake collaborative thesis research must be obtained in advance from the Vice Chancellor or his/her designee. Undergraduate students who wish to undertake joint thesis research should submit a request to the Office of the Vice Chancellor. Graduate students who wish to undertake joint thesis research should submit a request to the Office of Graduate Education via the general petition process http://odge.mit.edu/gpp/degrees/thesis/joint-theses

Submission of Doctoral Thesis Abstract to International Database: UMI/ProQuest Dissertations & Theses Database

Abstracts of all doctoral theses (PhD and ScD) will be submitted for inclusion in ProQuest Dissertations & Theses, an online database used by researchers around the world.  PQDT can be searched by author name, subject terms, and all words in the title and abstract.  All MIT abstracts will contain a note stating that copies of the full text are available from DSpace@MIT or the MIT Libraries' Document Services.

Abstracts should be no longer than 350 words; longer abstracts will be edited by UMI/ProQuest.  Please complete the UMI/ProQuest form at http://libraries.mit.edu/archives/thesis-specs/images/umi-proquest-form.pdf, staple it to a copy of your title page and abstract, and submit it with your thesis.  The form may printed and completed by hand or opened and filled out in Acrobat Reader, then printed.

When filling out the form, choose the appropriate subject categories from the list provided with the form.  Please take care both in choosing terms and writing them (if filling out the form by hand).  Subject-based access to your thesis will depend on the accuracy of the information you provide and the precision with which it is transcribed by UMI/ProQuest.  It is especially important that your name appear on this form exactly as it does on the title page and abstract of your thesis.


All changes made to a thesis, after the thesis has been submitted to the MIT Libraries by the student's department, must have prior approval from the Vice Chancellor or his/her designee.

When the purpose is to correct significant errors in content, the student should create an errata sheet using the form and instructions at https://libraries.mit.edu/archives/thesis-specs/images/errata-sheet.pdf and obtain approval first from both thesis supervisor or program chair, before submitting for review by the Vice Chancellor. If the purpose of change is to excise classified, proprietary, or confidential information, the student should fill out the application form at https://libraries.mit.edu/archives/thesis-specs/images/page-substitution.pdf and have the request approved first by the thesis supervisor or program chair, before submitting for review by the Vice Chancellor.  Students and supervisors should vet thesis content carefully before submission to avoid both scenarios whenever possible.


Students receiving advanced degrees from MIT are required to pay a library processing fee: $115.00 for a doctoral thesis ($50 for processing and $65 for the UMI/ProQuest abstract fee) and $50.00 for all other advanced-degree theses. Undergraduate students do not pay a processing fee.

Thesis charges are billed to the student’s account when the thesis title is entered on the degree application.  Please refer to the academic calendar on the Registrar’s website to review relevant deadline dates.


All copies must be submitted to the student’s department unbound between cardboard covers; the thesis and covers should be clipped or tied together, NOT stapled or punched.  Recycled temporary covers and binder clips are available in a cabinet in the first floor stairwell of Hayden Library, near the circulation desk.  The front cover should be labeled with the following information: author's name, thesis title, course, month and year of graduation, and which copy it is (first, second, or third).

The MIT Libraries pay for the binding of theses retained in their collection.  Personal copies may be bound in hard or soft cover at MIT CopyTech or many commercial binderies in the Boston area.


The Institute's policy concerning ownership of thesis copyright is covered in Rules and Regulations of the Faculty, 2.73. (http://web.mit.edu/faculty/governance/rules/2.70.html) and MIT Policies and Procedures 13.1.3 (http://web.mit.edu/policies/13/13.1.html#sub3). The following are guidelines to assist the student in determining who holds ownership of the thesis copyright:

The Institute will hold ownership of the copyrights to theses if:

  1. the thesis research is performed in whole or in part by the student with financial support in the form of wages, salary, stipend, or grant from funds administered by the Institute


  1. the thesis research is performed in whole or in part utilizing equipment or facilities provided to the Institute under conditions that impose copyright restrictions. 

In general, students may retain ownership of thesis copyrights when the only form of support is (a) teaching assistantships (the duties of which do not include research activities) and (b) NSF and NIH traineeships and fellowships (although the trainee or fellow may be required to grant certain publishing rights to NSF or NIH).  Actual determination of a student's status is made by reference to the account from which the student receives support.  Questions regarding restrictions imposed on any of the Institute's facilities or equipment may be addressed to the administrative officer of the laboratory or department or to the appropriate contract administrator in the Office of Sponsored Programs (http://osp.mit.edu/). Specific questions on permission to copyright should be referred to the Technology Licensing Office (617-253-6966, tlo@mit.edu).

When copyright ownership is held by the student, the student must, as condition of a degree award, grant royalty-free permission to the Institute to reproduce and publicly distribute copies of the thesis, and must place the following legend on the thesis title page: "The author hereby grants to MIT permission to reproduce and to distribute publicly paper and electronic copies of this thesis document in whole or in part in any medium now known or hereafter created."  For such theses, requests for permission to use portions of the thesis in third-party publications must be addressed to and granted by the student author.

When copyright is held by the Institute, students and third parties should contact the MIT Technology Licensing Office (617-253-6966, tlo@mit.edu) to obtain permission to reuse thesis content in other publications.  However, the student is authorized to post electronic versions of the student’s own thesis, in whole or in part, on the World Wide Web.  Any further publication of the thesis in whole or in part shall be made only with the authorization of the Technology Licensing Office, in consultation with the head of the department or course in which the student was registered when the thesis was accepted.

Regardless of whether copyright is held by the student or the Institute, the MIT Libraries publish the thesis electronically in DSpace@MIT (http://dspace.mit.edu) allowing open access viewing and limited downloading/ printing.

Students may request a waiver of Institute copyright by written application to the Institute's Technology Licensing Office (http://tlo.mit.edu/). The waiver shall be granted only if the retained rights of the student as described in this guide are inadequate for the student’s needs and if a license from the Institute to the student would also be inadequate.  Any such waiver of the Institute’s copyright shall be subject to a royalty-free grant from the student to the Institute to publicly distribute copies of the thesis, in whole or in part.  The student must also place the legend above on the thesis title page.

Implementation: How to Copyright a Thesis

Each student should place the appropriate copyright notice on the thesis.  Copyright notice consists of four elements:

  1. the symbol "c" with a circle around it © and/or the word "copyright,"
  2. the year of publication (the year in which the degree is to be awarded),
  3. the name of the copyright owner, and
  4. the words "All rights reserved."

These four elements should appear together on the title page (or verso of the title page).


  • student is copyright owner: © 2008 Jane Doe. All rights reserved.
  • Institute is copyright owner: © 2008 Massachusetts Institute of Technology. All rights reserved.

See sample title pages.  A copyright notice should also appear on any non-paper material (e.g., DVD or CD) included with a thesis.

Use of Previously Published Material in a Thesis

Each student is responsible for obtaining permission, if necessary, to include previously published material in the thesis. This applies to most third-party materials (i.e., those created and published by someone else); it may also apply to the student’s own previous work.  If, for example, a student has already published part of the thesis as a journal article and, as a condition of publication, has assigned title to the  journal's publisher, the student has no further rights in the article.  Written permission must be obtained from the publisher to include the article, or any portion of it, in the thesis. Similarly, permission must be obtained to include papers written while the student was employed by a commercial company or non-profit organization if title belongs to the company or organization.  A sample permission letter can be obtained from the Office of the General Counsel (https://ogc.mit.edu/frequently-asked-questions).

If the student knows, prior to publication or employment, that such material will be included in a thesis, he or she may wish to retain title to the material or to reserve sufficient rights to use the material.  Further information is available at Scholarly Publishing @MIT Libraries (http://libraries.mit.edu/scholarly/) or by contacting copyright-lib@mit.edu for more information.


Thesis research should be undertaken in light of MIT's policy of open research and the free interchange of information.  Written notification of patent holds and other restrictions must reach the Institute Archives before the thesis in question is received, since under normal circumstances all theses are open and available for public inspection once they have been received by the Archives.  When there is good reason for delaying the distribution of a thesis, the procedures below should be followed.

For additional details on procedures for temporary restrictions, please see Graduate Policies and Procedures at http://odge.mit.edu/gpp/degrees/thesis/restrictions-on-thesis-publication/.

Patent Claims

When MIT holds the rights to any intellectual property contained in a thesis, students and their supervisors must work with the MIT Technology Licensing Office (http://web.mit.edu/tlo/www/) to determine if a patent application is to be filed. If so, the Technology Licensing Office will notify the Institute Archives, and the thesis will be withheld from distribution for up to 90 days. If an extension is required, application must be made to the Vice President for Research, who will inform the Archives if an extension is approved.

When a student holds the rights to any intellectual property contained in his or her thesis, application for permission to withhold a thesis temporarily from distribution must be granted by the Vice Chancellor or his/her designee. Undergraduate students should follow instructions found here: https://due.mit.edu/faqs/frequently-asked-questions#Thesis_Hold. Graduate students should follow instructions found here: https://odge.mit.edu/gpp/degrees/thesis/restrictions-on-thesis-publication/.

If the hold is granted, the Vice Chancellor will inform the Archives, and the thesis will be withheld for a period of 90 days.  If an extension is required, application must be made to the Vice President for Research.

Government Restrictions

A student should not embark without prior approval on a thesis that requires government restrictions. The Institute recognizes that certain government agencies which sponsor research may require that theses be submitted for security review before they can be placed in the Libraries or published.

Privacy and Security

Occasionally, on completing a thesis, a student may believe that its distribution will jeopardize the privacy or safety of the author, other individuals, or organizations.  If the thesis cannot be rewritten to remove the problematic material, the author and supervisor should submit the thesis to the director of the program, who will prepare a recommendation for the Vice Chancellor, who will then consult with the Vice President for Research.  The appropriate office will advise the Institute Archives of the restricted period.  In all cases the restricted period should be kept to a minimum.



The title page is always considered to be page 1, and every page must be included in the count regardless of whether a number is physically printed on a page. The entire thesis (including title page, prefatory material, illustrations, and all text and appendices) must be paginated in one consecutive numbering sequence.

Theses should be prepared double-sided whenever possible.  In a double-sided thesis, both sides of every page (starting with the title page and including any pages that have been left blank) must be accounted for in the numbering sequence.  Therefore, in a double-sided thesis, odd-numbered pages are always on the right and even-numbered pages on the left.  Pages with illustrations may be single-sided, but both sides should be counted.  Single-sided theses should be numbered only on the front of every sheet.

When using thesis templates on Athena, use caution and verify that the pagination requirements are being met.


Your work will be a more valuable research tool for other scholars if it can be located easily.  Search engines use the words in the title, and sometimes other descriptive words, to locate works. Therefore,

  1. be sure to select a title that is a meaningful description of the content of your manuscript; and
  2. when possible, use word substitutes for formulas, symbols, superscripts, Greek letters, etc., which do not appear on most computer keyboards and would make your title more difficult to search.


  • "The Effects of Ion Implantation and Annealing on the Properties of Titanium Silicide [not TiSi2] Films on Silicon Substrates"
  • "Radiative Decays of the J/Psi [not J/ψ] to Two Pseudoscalar Final States"

Thesis Title Page

The title page of the first copy must bear the original signatures of the author, supervisor, and chairman; a photocopy of the signed title page is acceptable for the second copy.  The title page should contain the title, name of the author, previous degrees, the degree(s) to be awarded at MIT, the date the degree(s) will be conferred (June, September, or February only), copyright notice, and appropriate names and signatures.

For candidates receiving two degrees, both degrees to be awarded should appear on the title page.  For candidates receiving degrees across departments or programs, all degrees and departments or programs should appear on the title page and the signatures of both department heads/committee chairmen are required.  Whenever there are co-supervisors, both signatures are required.

See the proper title page layout [PDF].

Sample Title Pages:
Bachelor's Degree, Student Owns Copyright [PDF]
PhD Degree, MIT Owns Copyright [PDF]
Simultaneous Master's Degrees, Two Departments [PDF]
All Degrees, Multiple Authors [gif image]

Thesis Abstract Page

Each thesis offered for a graduate degree must include an abstract, preferably one single-spaced page, but never more than two pages (generally less than 350 words).  The abstract should be thought of as a brief descriptive summary rather than a lengthy introduction to the thesis.  Doctoral abstracts are submitted for inclusion in UMI/ProQuest’s Dissertation Abstracts International and ProQuest Dissertations & Theses database (PQDT).  Doctoral candidates should keep their abstracts under 350 words.  Longer abstracts will be edited and shortened by UMI/ProQuest.  Databases such as PQDT provide full-text searching of abstracts, so the presence of significant key words in a short abstract will facilitate access. The abstract should immediately follow the title page.

See the proper abstract layout. [PDF]

Sample Abstract [PDF]

Biographical Note and Acknowledgment

Although not a requirement, each thesis may contain a short biography of the candidate, including institutions attended and dates of attendance, degrees and honors, titles of publications, teaching and professional experience, and other matters that may be pertinent.  An acknowledgment page may also be included.  These sections may be single-spaced.

Please note that your thesis will be publicly available online at DSpace@MIT, which is regularly crawled and indexed by Google and other search-engine providers. 


The style of quotations, footnotes, and bibliographic references may be prescribed by your department.  If your department does not prescribe a style or specify a style manual, choose one and be consistent.  Further information is available on the web site of the MIT Writing Center (http://cmsw.mit.edu/writing-and-communication-center/citation-formats/).


Whenever possible, notes should be placed at the bottom of the appropriate page or in the body of the text.  Notes should conform to the style appropriate to the discipline.  If notes appear at the bottom of the page, they should be single-spaced and included within the specified margins (see section below).

It may be appropriate to place bibliographic references either at the end of the chapter in which they occur or at the end of the thesis. 


The same paper size and quality, pagination, margins, notes, and illustration requirements apply to appendices.  They support the research in your thesis and should be as readable and reproducible as the rest of your work.  Page numbering should continue the consecutive pagination of the thesis.


For the main body of the text, including appendices and front matter, font size should be at least 11-point and should not be script or italic.  Italics may, however, be used for short quotations or to highlight variables in an equation, for example.  Notes and the text in tables, etc., should not be smaller than 10-point.


Top, bottom, and both side margins must be at least an inch wide (1") to allow for binding and trimming.  All information (text headings, notes, and illustrations), excluding page numbers, must be within the text area.  Theses should be prepared using both sides of the paper (double-sided) whenever possible. Oversize sheets must be folded to come within the text area so the folds will not be trimmed off or bound in during the binding procedure.

The text of the thesis may be single- double- or one-and-a-half-spaced.  The abstract, biography, notes, bibliography, and acknowledgment should be single-spaced.

If you are writing your thesis on Athena, follow the formatting and typeface instructions under the LATEX or FRAME olc stock answer topics by typing the command "olc_answers" on any Athena workstation.



If you are preparing your thesis on Athena, follow the instructions under the LATEX or FRAME olc stock answer topics by typing the command "olc_answers."  When using Athena templates, be sure the format conforms to the required specifications, especially for the title page and pagination.  Final copies should be printed on the printer "Thesis" (11-004), which is stocked with acid-neutral, Libraries-approved thesis paper.


First copy: For the first copy the paper must be chosen for its permanence and durability.  This is the copy that should bear the original signatures. The paper must be (a) acid‑neutral or acid-free, (b) watermarked, (c) at least 20-lb. weight, and (d) contain at least 25% cotton.  It may contain some post-consumer waste (pcw) recycled material.  The following 20‑lb. watermarked acid‑neutral papers are examples of those that are acceptable

  • Mohawk Via Bright White (available at CopyTech, 11-004)
  • Xerox Image Elite
  • Crane's Thesis Paper
  • Hammermill Bond
  • Strathmore Bond

Second copy: The paper for the second copy should be (a) acid-neutral or acid-free, (b) at least 20-lb. weight, and (c) contain 25% cotton.  It need not be watermarked.

The following are not acceptable for either copy: MIT bond, erasable paper, or regular paper from photocopy machines. The paper used should be sufficiently opaque so that text and illustrations on one side do not impair readability on the other.  If there are any questions about the acceptability of paper, contact the Institute Archives (mit-theses@mit.edu, 617-253-5136).

If you are preparing your thesis on Athena, print the final copies on the printer "Thesis," which is stocked with Mohawk Via Bright White.

The standard size for theses is 8½ by 11 inches (see section on oversized pages).


Double-sided printing is strongly recommended. However, the paper should be sufficiently opaque so that text and illustrations on one side do not impair readability on the other side. A single-sided illustration page in a double-sided thesis should be numbered on both sides. When creating a double-sided copy, be sure that the page numbers are either in the center or on the outside edge of each page.


Charts, graphs, tables, etc., should be reduced whenever possible to an 8½-by-11-inch format.  If material is not reducible, oversize sheets must be folded to come within the text area so the folds will not be trimmed off or bound in during the binding procedure.  Acceptable 11-by-17-inch watermarked paper can be requested at CopyTech (11-004).


Use of Color

Students may print their theses in full color.  Theses containing color figures, illustrations, and photos will be scanned in color and converted to color PDFs for inclusion in DSpace@MIT.  Please be aware that heavily saturated color graphics may “bleed through” and compromise legibility for double-sided pages.  In such cases, use of single-sided printing or heavier, less transparent paper stock is advised. 


Pages containing photographs should be numbered as regular pages.  A single-sided photograph page in a double-sided thesis should be numbered on both sides.

All graphics must respect  the 1”  margins.


Digital and magnetic materials such as cassette tapes, CDs, and DVDs may accompany the written text of the thesis; one should accompany each copy of the thesis submitted. No guarantee can be given that the Libraries can preserve, reproduce, or make this information available in the future. Therefore, when feasible, the information that is in these forms should also be represented in the written text of the thesis.


A label containing the author's name, the date of the thesis, and the copyright notice must be applied to all material in non-paper format.  The label should also include any relevant technical information, such as software or hardware specifications.


  • Is the author’s full name on the title page and the abstract? (See sections on title page and abstract.)

  • Are the correct names and titles of the thesis supervisor(s) and program head(s) on the title page? (See section on title page)

  • Does the title on the title and abstract pages agree with the title given to the registrar?

  • Is the publication date correct on the title page?  The month should always be September, February, or June.

  • Does the title page carry the appropriate copyright notice and, in cases where the student owns copyright, the appropriate copyright permission statement? (See section on copyright.)

  • Is the supervisor’s name on the abstract page? (see section on abstract)

  • Is the date submitted to the department correct on the abstract page? (see abstract layout)

  • Is the page-numbering sequence complete and correct? (See section on pagination.)

  • If you are printing double-sided (which is highly recommended), are page numbers placed either in the center or on the outside edge of every page? (see section on double- or single-sided printing)

  • Have you obtained permission to use previously published material? (See section on previously published material.)

  • If you included acknowledgments and/or a biography, have you checked them for information you do not want exposed to internet search engines like Google?

  • Are you printing the thesis, including the title page, on the correct paper? (See section on paper.)

  • Are you printing the correct number of copies? (See section on what is submitted.)

Before submitting to your department

  • Are all necessary signatures on the title page of each copy? (See section on title page)

  • Are the signatures for copy 1 original, not photocopied? (See section on title page)

  • Has each copy been correctly collated?  Are any pages missing or out of order? (See section on pagination.)

  • For doctoral theses only, has the form for UMI/ProQuest been completed, and has it been stapled to an extra copy of the title page and abstract? (See section on what is submitted-UMI/ProQuest)

  • Are you submitting the correct number of copies?  (See section on what is submitted.)


Institute Archives and Special Collections
Room 14N-118

Document Services
Room 14-0551

Technology Licensing Office
255 Main St
Kendall Square
Building NE18-501
Cambridge, MA 02142

Office of the General Counsel
Room 7-206

Office of Graduate Education
Room 3-138

Office of Undergraduate Education
Room 7-133

Office of the Vice Chancellor
Room 7-133

Office of the Vice President for Research
Room 3-234


Prepared by the MIT Libraries
as prescribed by the Committee on Graduate Programs
and the Committee on Undergraduate Programs

Valid for 2016-2017, 2017-2018
Institute Archive and Special Collections

Room 14N-118 | 617-253-5136


0 Thoughts to “Dissertation Paper Stock

Leave a comment

L'indirizzo email non verrà pubblicato. I campi obbligatori sono contrassegnati *